Clear Dot1X Bonded-Period - 3Com WX4400 Command Reference Manual

546 C 17: 802.1X M
HAPTER
clear dot1x
bonded-period
C
ANAGEMENT OMMANDS
Table 86 802.1X Commands by Usage (continued)
Type
Reauthentication, cont.
Retransmission
Quiet Period and Timeouts
Settings, Active Clients, and
Statistics
Resets the Bonded Auth™ (bonded authentication) period to its default
value. The bonded period is the number of seconds MSS retains session
information for an authenticated machine while waiting for an 802.1X
client on the machine to start (re)authentication for the user. When
bonded authentication is enabled, it applies only to an 802.1X user
whose authentication rule on the WX switch contains the bonded
option.
Syntax —

clear dot1x bonded-period

Defaults — The default bonded authentication period is 0 seconds,
which disables the feature.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To reset the Bonded period to its default, type the following
command:
WX4400# clear dot1x bonded-period
success: change accepted.
Command
clear dot1x reauth-max on page 549
set dot1x reauth-period on page 561
clear dot1x reauth-period on page 549
set dot1x max-req on page 557
clear dot1x max-req on page 547
set dot1x quiet-period on page 559
clear dot1x quiet-period on page 548
set dot1x timeout auth-server on page 561
clear dot1x timeout auth-server on
page 550
set dot1x timeout supplicant on page 562
clear dot1x timeout supplicant on page 550
display dot1x on page 551