3Com WX4400 Command Reference Manual page 340

340 C 11: M
HAPTER ANAGED
A P C
CCESS OINT OMMANDS
Table 65 Configurable Profile Parameters for Distributed MAPs (continued)
Parameter
tx-pwr
radio-profile
max-power
min-client-rate
max-retransmissions
Examples — The following command creates a profile for automatic
Distributed MAP configuration:
WX1200# set dap auto
success: change accepted.
See Also
set dap auto mode on page 342
set dap auto persistent on page 341
set dap auto radiotype on page 342
set {ap | dap} bias on page 343
set {ap | dap} blink on page 345
set {ap | dap} group on page 351
set {ap | dap} radio auto-tune max-power on page 354
set {ap | dap} radio auto-tune max- retransmissions on page 356
set {ap | dap} radio auto-tune min-client-rate on page 359
set {ap | dap} radio mode on page 360
set {ap | dap} radio radio-profile on page 362
set {ap | dap} upgrade-firmware on page 365
Default Value
Highest setting allowed for the
country of operation
default
default
5.5 for 802.11b/g
24 for 802.11a
10