Clear Security 12-Restrict Counters; Set Security L2-Restrict - 3Com WX4400 Command Reference Manual

104 C 5: VLAN C
HAPTER
clear security
12-restrict counters
OMMANDS
Examples — The following command removes MAC address
aa:bb:cc:dd:ee:ff from the list of addresses to which clients in VLAN
abc_air are allowed to send traffic at Layer 2:
WX4400# clear security 12-restrict vlan abc_air permit-mac
aa:bb:cc:dd:ee:ff
success: change accepted.
See Also
clear security 12-restrict counters on page 104
clear security 12-restrict on page 103
display security 12-restrict on page 113
Clears statistics counters for Layer 2 forwarding restriction.
Syntax — clear security 12-restrict counters [vlan vlan-id | all]
— VLAN name or number.
vlan-id
all — Clears Layer 2 forwarding restriction counters for all VLANs.
Defaults — If you do not specify a VLAN or all, counters for all VLANs
are cleared.
Access — Enabled.
History —Introduced in MSS Version 4.1.
Usage — To clear MAC addresses from the list of addresses to which
clients are allowed to send data, use the clear security 12-restrict
command instead.
Examples — The following command clears Layer 2 forwarding
restriction statistics for VLAN abc_air:
WX4400# clear security 12-restrict counters vlan abc_air
success: change accepted.
See Also
clear security 12-restrict on page 103
set security l2-restrict on page 118
display security 12-restrict on page 113