Set Length - 3Com WX4400 Command Reference Manual

54 C 3: S
HAPTER YSTEM

set length

S C
ERVICE OMMANDS
Usage — This command remains in effect for the duration of the session,
until you enter a quit command, or until you enter another set confirm
command.
MSS displays a message requiring confirmation when you enter certain
commands that can have a potentially large impact on the network. For
example:
WX4400# clear vlan red
This may disrupt user connectivity.
Do you wish to continue? (y/n) [n]
Examples — To turn off these confirmation messages, type the
following command:
WX4400# set confirm off
success: Confirm state is off
Defines the number of lines of CLI output to display between paging
prompts. MSS displays the set number of lines and waits for you to press
any key to display another set, or type q to quit the display.
Syntax — set length number-of-lines
number-of-lines
paging prompts. You can specify from 0 to 512. The 0 value disables
the paging prompt action entirely.
Defaults — MSS displays 24 lines by default.
Access — All.
History — Introduced in MSS Version 3.0.
Usage — Use this command if the output of a CLI command is greater
than the number of lines allowed by default for a terminal type.
Examples — To set the number of lines displayed to 100, type the
following command:
WX4400# set length 100
success: screen length for this session set to 100
— Number of lines of text to display between