Set System Location - 3Com WX4400 Command Reference Manual

64 C 3: S
HAPTER YSTEM

set system location

S C
ERVICE OMMANDS
Stores location information for the WX switch.
Syntax —
set system location string
— Alphanumeric string up to 256 characters long, with no
string
blank spaces.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — You cannot include spaces in the system location string.
To view the system location string, type the display system command.
Examples — To store the location of the WX switch in the WX's
configuration, type the following command:
WX4400# set system location first-floor-bldg3
success: change accepted.
See Also
clear system on page 42
display system on page 45
set system contact on page 57
set system name on page 65