Set Service-Profile Dhcp-Restrict - 3Com WX4400 Command Reference Manual

404 C 11: M
HAPTER
set service-profile
dhcp-restrict
A P C
ANAGED CCESS OINT OMMANDS
See Also
set service-profile static-cos on page 423
display service-profile on page 330
Enables or disables DHCP Restrict on a service profile. DHCP Restrict filters
a newly associated client's traffic to allow DHCP traffic only, until the
client has been authenticated and authorized. All other traffic is captured
by the WX and is not forwarded. After the client is successfully
authorized, the traffic restriction is removed.
Syntax
— set service-profile name dhcp-restrict {enable |
disable}
— Service profile name.
name
enable — Enables DHCP Restrict.
disable — Disables DHCP Restrict.
Examples — DHCP Restrict is disabled by default.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Usage — To further reduce the overhead of DHCP traffic, use the set
service-profile no-broadcast command to disable DHCP broadcast
traffic from MAP radios to clients on the service profile's SSID.
Examples — The following command enables DHCP Restrict on service
profile sp1:
WX4400# set service-profile sp1 dhcp-restrict enable
success: change accepted.
See Also
set service-profile no-broadcast on page 407
set service-profile proxy-arp on page 408
display service-profile on page 330