Display Snmp Community - 3Com WX4400 Command Reference Manual

display snmp
community
Table 38 Output for display ntp (continued)
Field
Peer state
Local state
See Also
clear ntp server on page 135
clear summertime on page 139
clear timezone on page 140
display timezone on page 159
set ntp on page 177
set ntp server on page 178
set summertime on page 195
set timezone on page 198
Displays the configured SNMP community strings.
Syntax —

display snmp community

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Description
State of the NTP session from the point of view of the NTP
server:
CORRECT
REJECT
SELCAND
SYNCCAND
SYSPEER
State of the NTP session from the point of view of the WX
switch's NTP client:
INITED
START
SYNCED
display snmp community 155