Set Ip Dns Domain - 3Com WX4400 Command Reference Manual

set ip dns domain

See Also
clear ip dns domain on page 133
clear ip dns server on page 133
display ip dns on page 148
set ip dns domain on page 169
set ip dns server on page 170
Configures a default domain name for DNS queries. The wireless LAN
switch appends the default domain name to domain names or
hostnames you enter in commands.
Syntax —
set ip dns domain name
— Domain name of between 1 and 64 alphanumeric characters
name
with no spaces (for example, example.org).
Defaults — None.
Access — Enabled.
Usage — To override the default domain name when entering a
hostname in a CLI command, enter a period at the end of the hostname.
For example, if the default domain name is example.com, enter
the fully qualified hostname is chris and not chris.example.com.
Aliases take precedence over DNS. When you enter a hostname, MSS checks
for an alias with that name first, before using DNS to resolve the name.
Examples — The following command configures the default domain
name example.com:
WX1200# set ip dns domain example.com
Domain name changed
See Also
clear ip dns domain on page 133
clear ip dns server on page 133
display ip dns on page 148
set ip dns on page 168
set ip dns server on page 170
set ip dns domain 169
chris. if