Display Crypto Key Ssh - 3Com WX4400 Command Reference Manual

528 C 15: C
HAPTER RYPTOGRAPHY
display crypto key
ssh
C
OMMANDS
Displays SSH authentication key information. This command displays the
checksum (also called a fingerprint) of the public SSH authentication key.
When you connect to the WX switch with an SSH client, you can
compare the SSH key checksum displayed by the WX switch with the one
displayed by the client to verify that you really are connected to the WX
switch and not another device. Generally, SSH clients remember the
encryption key after the first connection, so you need to check the key
only once.
Syntax —

display crypto key ssh

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — To display SSH key information, type the following
command:
WX4400# display crypto key ssh
ec:6f:56:7f:d1:fd:c0:28:93:ae:a4:f9:7c:f5:13:04
See Also crypto generate key on page 517