Set Dot1X Reauth-Max - 3Com WX4400 Command Reference Manual

Wireless lan switch and controller
Hide thumbs Also See for WX4400:
Table of Contents

Advertisement

560
C
17: 802.1X M
HAPTER
set dot1x
reauth-max
C
ANAGEMENT
OMMANDS
See Also
display dot1x on page 551
set dot1x reauth-max on page 560
set dot1x reauth-period on page 561
Sets the number of reauthentication attempts that the WX switch makes
before the supplicant (client) becomes unauthorized.
Syntax —
set dot1x reauth-max number-of-attempts
number-of-attempts
Defaults — The default number of reauthentication attempts is 2.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — If the number of reauthentications for a wired authentication
client is greater than the maximum number of reauthentications allowed,
MSS sends an EAP failure packet to the client and removes the client from
the network. However, MSS does not remove a wireless client from the
network under these circumstances.
Examples — Type the following command to set the number of
authentication attempts to 8:
WX4400# set dot1x reauth-max 8
success: dot1x max reauth set to 8.
See Also
display dot1x on page 551
clear dot1x reauth-max on page 549
— Specify a value between 1 and 10.

Advertisement

Table of Contents
loading

Table of Contents