Display {Ap | Dap} Group - 3Com WX4400 Command Reference Manual

display {ap | dap}
group
Table 53 Output of display ap etherstats (continued)
Field
TxMaxColl
TxMultiColl
TxUnderruns
TxCarrierLoss
TxDeferred
Displays configuration information and load-balancing status for MAP
access point groups.
Syntax — display {ap | dap} group [name]
name — Name of a MAP group or Distributed MAP group.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following command displays information for MAP
access point group loadbalance1:
WX1200# display ap group loadbalance1
Load Balance Grp Port Clients
---------------- ---- -------
loadbalance1
loadbalance1
Table 54 describes the fields in this display.
Description
Number of frames that were not transmitted because they
encountered the maximum allowed number of collisions.
Typically, this occurs only during periods of heavy traffic on
the network.
Number of transmitted frames that encountered more
than one collision.
Number of frames that were not transmitted or
retransmitted due to temporary lack of hardware
resources.
Number of frames transmitted despite the detection of a
deassertion of CRS during the transmission.
Number of frames deferred before transmission due to
activity on the link.
Status
--------- -------
1 1 Accepting
6 6 Refusing

display {ap | dap} group

Refused
0
2
309