Backup - 3Com WX4400 Command Reference Manual

Wireless lan switch and controller
Hide thumbs Also See for WX4400:
Table of Contents

Advertisement

612
C
20: F
HAPTER
ILE

backup

M
C
ANAGEMENT
OMMANDS
Table 103 File Management Commands by Usage (continued)
Type
System Backup
and Restore
Sygate
On-Demand
Agent (SODA) file
installation and
removal
Creates an archive of WX system files and optionally, user file, in Unix
tape archive (tar) format.
Syntax —
backup system [tftp:/ip-addr/]filename [all |
critical]
Defaults — All.
Access — Enabled.
History —.
Usage — You can create an archive located on a TFTP server or in the
switch's nonvolatile storage. If you specify a TFTP server as part of the
filename, the archive is copied directly to the TFTP server and not stored
locally on the switch.
Use the critical option if you want to back up or restore only the
system-critical files required to operate and communicate with the
switch. Use the all option if you also want to back up or restore WebAAA
pages, backup configuration files, image files, and any other files stored
in the user files area of nonvolatile storage.
The maximum supported file size is 32 MB. If the file size of the tarball is
too large, delete unnecessary files (such as unneeded copies of system
image files) and try again, or use the critical option instead of the all
option.
Neither option archives image files or any other files listed in the Boot
section of dir command output. The all option archives image files only if
they are present in the user files area.
Command
backup on page 612
restore on page 632
install soda agent on page 621
display boot on page 622

Advertisement

Table of Contents
loading

Table of Contents