Set {Ap | Dap} Radio Antennatype - 3Com WX4400 Command Reference Manual

set {ap | dap} radio
antennatype
See Also
display {ap | dap} config on page 296
Sets the model number for an external antenna.
Syntax —
set {ap port-list | dap dap-num} radio {1|2} antennatype
{ANT1060 | ANT1120 | ANT1180 |
ANT5060 | ANT5120 | ANT5180 |
ANT-1360-OUT | ANT-5360-OUT |ANT-5120-OUT | internal}
— List of ports connected to the MAP access points on
ap port-list
which to set the channel.
— Number of a Distributed MAP on which to set the
dap dap-num
channel.
— Radio 1 of the MAP.
radio 1
radio 2 — Radio 2 of the MAP. (This option does not apply to
single-radio models.)
antennatype {ANT1060 | ANT1120 | ANT1180 | internal}
802.11b/g external antenna models:
ANT1060 — 60° 802.11b/g antenna
ANT1120 — 120° 802.11b/g antenna
ANT1180 — 180° 802.11b/g antenna
internal — uses the internal antenna instead
antennatype {ANT5060 | ANT5120 | ANT5180 | internal}
802.11a external antenna models:
ANT5060 — 60° 802.11a antenna
ANT5120 — 120° 802.11a antenna
ANT5180 — 180° 802.11a antenna
internal — uses the internal antenna instead
antennatype
{ANT-1360-OUT | ANT5360-OUT | ANT5060 | ANT5120-OUT |
internal} — 802.11a external antenna models:
ANT1360-OUT
ANT5360-OUT

set {ap | dap} radio antennatype

— 360° 802.11b/g antenna
— 360° 802.11a antenna
353
—
—