3Com WX4400 Command Reference Manual page 308

308 C 11: M
HAPTER ANAGED
A P C
CCESS OINT OMMANDS
Examples — The following command displays Ethernet statistics for the
Ethernet ports on Distributed MAP 1:
WX4400# display dap etherstats 1
DAP: 1
=================================
RxUnicast:
RxMulticast:
RxBroadcast:
RxGoodFrames:
RxAlignErrs:
RxShortFrames:
RxCrcErrors:
RxOverruns:
RxDiscards:
Table 53 describes the fields in this display.
Table 53 Output of display ap etherstats
Field
RxUnicast
RxMulticast
RxBroadcast
RxGoodFrames
RxAlignErrs
RxShortFrames
RxCrcErrors
RxOverruns
RxDiscards
TxGoodFrames
TxSingleColl
TxLateColl
ether: 1
75432 TxGoodFrames:
18789 TxSingleColl:
8 TxLateColl:
94229 TxMaxColl:
0 TxMultiColl:
0 TxUnderruns:
0 TxCarrierLoss:
0 TxDeferred:
0
Description
Number of unicast frames received.
Number of multicast frames received.
Number of broadcast frames received.
Number of frames received properly from the link.
Number of received frames that were both misaligned and
contained a CRC error.
Number of received frames that were shorter than the
minimum frame length.
Number of received frames that were discarded due to
CRC errors.
Number of frames known to be lost due to a temporary
lack of hardware resources.
Number of frames known to be lost due to a temporary
lack of software resources.
Number of frames transmitted properly on the link.
Number of transmitted frames that encountered a single
collision.
Number of frames that were not transmitted because they
encountered a collision outside the normal collision
window.
55210
32
0
0
47
0
0
150