Display Rfdetect Clients - 3Com WX4400 Command Reference Manual

display rfdetect
clients
WX4400# display rfdetect clients
Total number of entries: 30
Client MAC
----------------- ------- ----------------- ------- ------------- --- ----- ----
00:03:7f:bf:16:70 Unknown
00:04:23:77:e6:e5
00:05:5d:79:ce:0f
00:05:5d:7e:96:a7
00:05:5d:7e:96:ce
00:05:5d:84:d1:c5
WX4400# display rfdetect clients mac 00:0c:41:63:fd:6d
Client Mac Address: 00:0c:41:63:fd:6d, Vendor: Linksys
Port: dap 1, Radio: 1, Channel: 11, RSSI: -82, Rate: 2, Last Seen (secs ago):
84
Bssid: 00:0b:0e:01:02:00, Vendor: 3Com, Type: intfr, Dst: ff:ff:ff:ff:ff:ff
Last Rogue Status Check (secs ago): 3
Displays the wireless clients detected by a WX switch.
Syntax —
display rfdetect clients [mac mac-addr]
— Displays detailed information for a specific client.
mac mac-addr
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command shows information about all
wireless clients detected by a WX switch's MAPs:
Client AP MAC
Vendor
Intel
D-Link
D-Link
D-Link
D-Link
The following command displays more details about a specific client:
The first line lists information for the client. The other lines list
information about the most recent 802.11 packet detected from the
client.
Table 95 and Table 96 describe the fields in these displays.
AP Port/Radio
Vendor
Unknown
Unknown
Unknown
Unknown
Unknown
Unknown

display rfdetect clients

NoL Type
/Channel
dap 1/1/6 1 intfr 207
dap 1/1/2 1 intfr 155
dap 1/1/149 1 intfr 87
dap 1/1/149 1 intfr 117
dap 1/1/157 1 intfr 162
dap 1/1/1 1 intfr 52
585
Last
seen