Display Rfdetect Ignore; Display Rfdetect Mobility-Domain - 3Com WX4400 Command Reference Manual

592 C 19: RF D
HAPTER
display rfdetect
ignore
display rfdetect
mobility-domain
C
ETECTION OMMANDS
Displays the BSSIDs of third-party devices that MSS ignores during RF
scans. MSS does not generate log messages or traps for the devices in the
ignore list.
Syntax —

display rfdetect ignore

Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — The following example displays the list of ignored devices:
WX4400# display rfdetect ignore
Total number of entries: 2
Ignore MAC
-----------------
aa:bb:cc:11:22:33
aa:bb:cc:44:55:66
See Also
clear rfdetect ignore on page 581
set rfdetect ignore on page 604
Displays the rogues detected by all WX switches in the Mobility Domain
during RF detection scans.
Syntax —

display rfdetect mobility-domain

[ssid ssid-name | bssid mac-addr]
ssid ssid-name
bssid mac-addr
BSSID.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0. Bssid and ssid options added;
Vendor, Type and Flag fields added in MSS Version 4.0.
— Displays rogues that are using the specified SSID.
— Displays rogues that are using the specified