3Com WX4400 Command Reference Manual page 593

WX1200# display rfdetect mobility-domain
Total number of entries: 194
Flags: i = infrastructure, a = ad-hoc, u = unresolved
c = CCMP, t = TKIP, 1 = 104-bit WEP, 4 = 40-bit WEP, w = WEP(non-WPA)
BSSID
----------------- ------------ ----- ------ --------------------------------
00:07:50:d5:cc:91
00:07:50:d5:dc:78
00:09:b7:7b:8a:54
00:0a:5e:4b:4a:c0
00:0a:5e:4b:4a:c2
00:0a:5e:4b:4a:c4
00:0a:5e:4b:4a:c6
00:0a:5e:4b:4a:c8
00:0a:5e:4b:4a:ca
...
Usage — This command is valid only on the seed switch of the Mobility
Domain. To display rogue information for an individual switch, use the
display rfdetect data command on that switch.
Only rogues are listed. To display all devices detected, including 3Com
radios, use the display rfdetect data command.
Examples — The following example displays information about the
BSSIDs detected in the Mobility Domain managed by the seed switch:
Vendor Type
Cisco intfr i----w r27-cisco1200-2
Cisco intfr i----w r116-cisco1200-2
Cisco intfr i-----
3Com intfr i----- public
3Com intfr i----w 3Comwlan
3Com intfr ic---- 3Com-ccmp
3Com intfr i----w 3Com-tkip
3Com intfr i----w 3Com-voip
3Com intfr i----- 3Com-webaaa
The lines in this display are compiled from data from multiple listeners
(MAP radios). If an item has the value unresolved, not all listeners agree
on the value for that item. Generally, an unresolved state occurs only
when a MAP or a Mobility Domain is still coming up, and lasts only briefly.
The following command displays detailed information for rogues using
SSID 3com-webaaa.
WX1200# display rfdetect mobility-domain ssid 3Com-webaaa
BSSID: 00:0a:5e:4b:4a:ca Vendor: 3Com SSID: 3Com-webaaa
Type: intfr Adhoc: no Crypto-types: clear
WX-IPaddress: 10.8.121.102 Port/Radio/Ch: 3/1/11 Mac:
00:0b:0e:00:0a:6a
Device-type: interfering Adhoc: no Crypto-types: clear
RSSI: -85 SSID: 3Com-webaaa
BSSID: 00:0b:0e:00:7a:8a Vendor: 3Com SSID: 3com-webaaa
Type: intfr Adhoc: no Crypto-types: clear
display rfdetect mobility-domain
Flags SSID
593