Display Arp - 3Com WX4400 Command Reference Manual

display arp

WX4400# display arp
ARP aging time: 1200 seconds
Host
------------------------------ ----------------- ----- ------- --------
10.5.4.51
10.5.4.53
History — Introduced in MSS Version 3.0.
Examples — To return the WX switch's real-time clock to UTC, type the
following command:
WX4400# clear timezone
success: change accepted.
See Also
clear summertime on page 139
set summertime on page 195
set timedate on page 197
set timezone on page 198
display summertime on page 158
display timedate on page 159
display timezone on page 159
Shows the ARP table.
Syntax — display arp [ip-addr]
ip-addr — IP address.
Defaults — If you do not specify an IP address, the whole ARP table is
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays ARP entries:
HW Address
00:0b:0e:02:76:f5
00:0b:0e:02:76:f7
VLAN Type State
1 DYNAMIC RESOLVED
1 LOCAL RESOLVED
display arp 141