Set Service-Profile Long-Retry-Count - 3Com WX4400 Command Reference Manual

406 C 11: M
HAPTER
set service-profile
long-retry-count
A P C
ANAGED CCESS OINT OMMANDS
Changes the long retry threshold for a service profile. The long retry
threshold specifies the number of times a radio can send a long unicast
frame without receiving an acknowledgment. A long unicast frame is a
frame that is equal to or longer than the frag-threshold.
Syntax —
set service-profile name long-retry-count threshold
— Service profile name.
name
threshold
unicast frame. You can enter a value from 1 through 15.
Defaults — The default long unicast retry threshold is 5 attempts.
Access — Enabled.
History —Introduced in MSS Version 4.2.
Examples — The following command changes the long retry threshold
for service profile sp1 to 8:
WX4400# set service-profile sp1 long-retry-count 8
success: change accepted.
See Also
set radio-profile frag-threshold on page 376
set service-profile short-retry-count on page 412
display service-profile on page 330
— Number of times the radio can send the same long