3Com WX4400 Command Reference Manual page 312

312 C 11: M
HAPTER ANAGED
WX1200# display ap status 1
Port: 1, AP model: AP2750, manufacturer 3Com, name: MAP01
====================================================
State: operational
CPU info: IBM:PPC speed=266666664 Hz version=405GPr
Uptime: 3 hours, 44 minutes, 28 seconds
Radio 2 type: 802.11g, state: configure succeed [Enabled] (802.11b protect)
operational channel: 1 operational power: 15
base mac: 00:0b:0e:00:d1:00
bssid1: 00:0b:0e:00:d1:00, ssid: public
bssid2: 00:0b:0e:00:d1:02, ssid: employee-net
bssid3: 00:0b:0e:00:d1:04, ssid: mycorp-tkip
WX4400# display dap status terse
Total number of entries: 4
Operational: 1, Image Downloading: 0, Unknown: 3, Other: 0
Flags: o = operational, b = booting, d = image downloading
c = configuring, f = configuration failed
a = auto DAP, i = insecure
Port Flg IP Address
------ --- ------------- ------ ----------------- ------ ------ ------------
3 ---
Dap 1 ---
Dap 2 ---
Dap100 oa- 10.8.255.11
A P C
CCESS OINT OMMANDS
The following command displays the status of a directly connected MAP:
id=0x28b08a1e047f1d0f ram=33554432
s/n=0333000288 hw_rev=A3
The following command uses the terse option to display brief
information for Distributed MAPs:
Model
MP-372
MP-372
MP-372
MP-122 00:0b:0e:da:da:82 E 1/17 E36/11
Table 55 and Table 56 describe the fields in this display.
Table 55 Output for display ap status
Field
DAP
MAC Address
D ?/?
D ?/?
D ?/?
Description
Connection ID for the Distributed MAP.
Note: This field is applicable only if the MAP is configured on
the WX switch as a Distributed MAP.
Radio1 Radio2 Uptime
D ?/? 0d 0h 0m 0s
D ?/? 0d 0h 0m 0s
D ?/? 0d 0h 0m 0s
0d 0h 0m17s