3Com WX4400 Command Reference Manual page 78

78 C 4: P
HAPTER ORT
WX1200# display port status
Port Name
===============================================================================
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
C
OMMANDS
Examples — The following command displays information for all ports
on a WX1200 switch:
Admin Oper
up up
up up
up up
up down
up down
up down
up down
up down
Table 13 describes the fields in this display.
Table 13 Output for display port status
Field
Port
Name
Admin
Oper
Config
Actual
Type
Config Actual
auto 100/full
auto 100/full
auto 100/full
auto
auto
auto
auto
auto
Description
Port number.
Port name. If the port does not have a name, the
port number is listed.
Administrative status of the port:
up — The port is enabled.
down — The port is disabled.
Operational status of the port:
up — The port is operational.
down — The port is not operational.
Port speed configured on the port:
10 — 10 Mbps.
100 — 100 Mbps.
1000 — 1000 Mbps.
auto — The port sets its own speed.
Speed and operating mode in effect on the port.
Port type:
ap — MAP access point port
network — Network port
wa — Wired authentication port
Type Media
network 10/100BaseTx
ap 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx
network 10/100BaseTx