Clear Dot1X Reauth-Max; Clear Dot1X Reauth-Period - 3Com WX4400 Command Reference Manual

clear dot1x
reauth-max
clear dot1x
reauth-period
Resets the maximum number of reauthorization attempts to the default
setting.
Syntax —

clear dot1x reauth-max

Defaults — The default is 2 attempts.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the maximum
number of reauthorization attempts to the default:
WX4400# clear dot1x reauth-max
success: change accepted.
See Also
display dot1x on page 551
set dot1x reauth-max on page 560
Resets the time period that must elapse before a reauthentication
attempt, to the default time period.
Syntax —

clear dot1x reauth-period

Defaults — The default is 3600 seconds (1 hour).
Access — Enabled.
History —Introduced in MSS Version 3.0.
Examples — Type the following command to reset the default
reauthentication time period:
WX4400# clear dot1x reauth-period
success: change accepted.
See Also
display dot1x on page 551
set dot1x reauth-period on page 561
clear dot1x reauth-max 549