Rmdir; Save Config - 3Com WX4400 Command Reference Manual

rmdir

save config

See Also
backup on page 612
Removes a subdirectory from nonvolatile storage.
Syntax —
rmdir [subdirname]
— Subdirectory name. Specify between 1 and 32
subdirname
alphanumeric characters, with no spaces.
Defaults — None.
Access — Enabled.
History —Introduced in MSS Version 3.0.
Usage — MSS does not allow the subdirectory to be removed unless it is
empty. Delete all files from the subdirectory before attempting to remove
it.
Examples — The following example removes subdirectory corp2:
WX4400# rmdir corp2
success: change accepted.
See Also
dir on page 618
mkdir on page 629
Saves the running configuration to a configuration file.
Syntax —
save config [filename]
— Name of the configuration file. Specify between 1 and
filename
128 alphanumeric characters, with no spaces.
To save the file in a subdirectory, specify the subdirectory name,
followed by a forward slash, in front of the filename. For example:
backup_configs/config_c.
Defaults — By default, MSS saves the running configuration as the
configuration filename used during the last reboot.
rmdir 633