Set Ipx System; Set Network Service <Admin_Name - 3Com OfficeConnect 3CP4144 Cli User's Manual

B-30 A B: CLI COMMAND DESCRIPTION
PPENDIX

set ipx system

set network service
<admin_name>
netbios Whether to support NetBIOS on dial-out IPX networks.
netbios_name_cache Whether or not to cache a list of the other NetBIOS systems on this
IPX network.
netbios_cache_timer How long a NetBIOS system will be kept in the cache.
netbios_max_hops Maximum number of hops this network will make to locate a
NetBIOS system.
packet_maximum_size Maximum size packet that this IPX network will support.
rip Sets the RIP mode.
rip_age_multiplier Number to multiply the rip_update_interval by, to obtain the value
for the aging out the entries in the RIP database.
rip_packet_size Size of RIP packets.
rip_update_interval How often RIP should send periodic updates.
sap Sets the SAP mode.
sap_age_multiplier Number to multiply the sap_update_interval by, to obtain the value
for aging out entries in the SAP database.
sap_packet_size Size of SAP packets.
sap_nearest_replies Whether or not SAP will look its nearest neighbors.
sap_update_interval How often RIP should send periodic updates.
priority [priority level]
default_gateway [ipx_host_add]
initial_pool_address [ipx_addr]
pool_members [number]
Sets parameters for dynamic IPX networks.
Parameters Description
priority Priority for the dynamic IPX network.
default_gateway Default router for the dynamic IPX network.
initial_pool_address Initial IPX address used to dynamically assign IPX network.
pool_members Number of addresses to reserve in the pool of IPX addresses used when
dynamically assigning IPX networks.
server_type [server_type]
socket [socket_number]
data ["string"]
close_active_connections [TRUE | FALSE]
Sets parameters for configured network services. You can list the configured
network services using list network services. The service must be disabled for this
command to work.
Parameters
<admin_name>
Description
Designation you assigned to network service with the add
network service command. Limit of 32 characters.