3.13 Adjustment of the Finisher (MJ-1022)
3.13.1
Adjusting the jogging plate width
(1)
Remove the right inner cover and the rear cover.
(2)
Adjust the front jogging plate to the home
position.
•
Set SW1 on the finisher controller PC
board as shown in Fig. 3-1301.
•
Press SW2 twice on the finisher controller
PC board.
-
The front jogging plate moves to the
home position.
(3)
Adjust the rear jogging plate to the home
position.
•
Set SW1 on the finisher controller PC
board as shown in Fig. 3-1302.
•
Press SW2 twice on the finisher controller
PC board.
-
The rear jogging plate moves to the
home position.
(4)
Measure the jogging width (standard at 317 mm).
e-STUDIO281c/351c/451c ADJUSTMENT
ON
1
2
3
ON
1
2
3
Rear jogging plate home position
3 - 78
4
5
6
7
8
Fig.3-66
4
5
6
7
8
Fig.3-67
Fig.3-68
June 2005 © TOSHIBA TEC