Table of Contents
Advertisement
blink during this time and the unit will reboot. After reboot, the WQAR will be
operational with the proper time.
System Menus
The WQAR menus are accessed using the Front Panel Buttons and are viewed
in the Front Panel Display. After bootup, the unit defaults to the SYSTEM
STATE display which shows the system status as shown in Figures 4 thru 7.
When navigating the WQAR menus, if the WQAR buttons experience no
activity for 30 minutes, the WQAR automatically returns to this display.
Menu Descriptions
SYSTEM STATE
This menu displays the current status of the unit and is what is shown after
the unit boots up. Typical displays are shown in Figures 4 thru 7. There are no
sub-menus.
UNIT INFO
This menu allows the operator to display, and sometimes change, basic
settings under the following sub-menus:
❖ DATE|TIME: The WQAR has its own clock and is set at the
factory. The WQAR does not use the captain's clock as a
basis. After setting the time (UTC), the unit will re-boot.
Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
P a g e
| 23
May 28, 2019
Hide quick links:
Advertisement
Table of Contents
