Stand-Alone Operation; Main Menu; Figure 3. Pmat 2000 Stand Alone Operation - Teledyne PMAT 2000 User Manual

Note: This above step is necessary to feed power to PMAT in the EE Bay unless
the PMAT is powered from external power or its internal batteries.
Note: Make sure the PMAT 2000 is powered from its internal batteries unless a
cable, P/N 80051 is used with AC power adapter to power the PMAT
2000.
2.2.4

Stand-alone Operation

The PMAT 2000 may be powered by its internal batteries (Figure 2) for up to 5 hours
(both batteries fully charged) of operation or by the AC power cable, P/N 80044-2
(Figure 3.). If AC power is not used to power the PMAT 2000, make sure that at least
one PMAT 2000 battery is installed and is functioning properly
2.3

Main Menu

The Main Menu is displayed after boot up. The Main Menu is the default display for the
PMAT 2000. The user can select any function from the Main Menu. The available
functions on the main menu are:
• PDL 615 Data Loading
• MCDP Remote Panel
• Archived Data
• PMAT 2000 Battery Status
• Users Guide
• LoadStar (optional)
80010 Revision J

Figure 3. PMAT 2000 Stand Alone Operation

January 18, 2011
PMAT 2000®
User Guide
Page 9