Side Louver - Chrysler 2005 Crossfire SRT6 Service Manual

23 - 320 EXTERIOR
INSTALLATION
1. Install the rocker panel (2).
2. Install the screws attaching the lift pads (1) to the
vehicle.
3. Install the screws attaching the rocker panel to the
vehicle.
4. Raise and support the vehicle.
5. Install the front wheel liner.
6. Lower the vehicle.

SIDE LOUVER

REMOVAL
CAUTION: Use care when removing any compo-
nent that is attached to the vehicles painted sur-
face. Take the necessary precautions to avoid
paint damage while servicing the vehicle.
Note: The side louvers are attached to the fender
using a combination of plastic retaining clips and
adhesive strips.
1. Carefully insert a plastic trim stick between the end
of the louver and the fender.
2. Gently pry the louver away from the fender to
break the adhesive bond between the louver and
the fender.
Note: It may be necessary to use a hot-air gun to
warm the adhesive strip in order to help break the
adhesive bond.
ZH