Chrysler 2005 Crossfire SRT6 Service Manual page 4168

ZH
A/C PRESSURE SENSOR CIRCUIT (CONTINUED)
13.
MEASURE THE RESISTANCE OF THE A/C PRESSURE SENSOR 5-VOLT SUPPLY CIRCUIT
With the ignition off.
Measure the resistance of the 5-Volt Supply circuit from the A/C Pres-
sure Sensor harness connector to the A/C Heater Control Module har-
ness connector.
Is the resistance below 5.0 ohms?
Yes >> Replace the A/C Heater Control Module. (Refer to 24 -
HEATING & AIR CONDITIONING/CONTROLS/HEATER
CONTROL - REMOVAL).
Perform BODY VERIFICATION TEST.
No >> Repair the A/C Pressure Sensor 5-Volt Supply circuit for
an open.
Perform BODY VERIFICATION TEST.
HEATING & AIR CONDITIONING - ELECTRICAL DIAGNOSTICS 24 - 39