Chrysler 2005 Crossfire SRT6 Service Manual page 4067

23 - 506 CONVERTIBLE TOP
15. Install the front cover retainer (4) and retaining
screws (1).
16. Lower tonneau cover down and manually lock into
place (Refer to 23 - BODY/CONVERTIBLE TOP -
STANDARD PROCEDURE).
17. Connect the negative battery cable.
INSTALLATION - CYLINDER TRAVEL SENSOR
1. Install the travel sensor (2) to the hydraulic cylin-
der.
Note: The travel sensor is retained by a pressed
fit. To install the travel sensor, gently press the
sensor into the hydraulic cylinder housing.
2. Rotate the hydraulic line (1) on the hydraulic cylin-
der, and tuck the line into the groove on the cylin-
der housing.
3. Tie wrap the hydraulic line to cylinder housing
using a plastic tie wrap (3).
ZH