Chrysler 2005 Crossfire SRT6 Service Manual page 3843

ZH
INSTALLATION
1. Install the door lock module (6) through installation opening then tighten the screws.
2. Connect the line (9) to the vacuum element on door lock.
3. Install the lock control cable (8) to the clip.
4. Install the nuts (2) and window run channel (1) through installation opening then install the rubber plug (3).
5. Install the foil on the front door.
6. Install the exterior door handle on the front door. (Refer to 23 - BODY/DOOR - FRONT/EXTERIOR HANDLE -
INSTALLATION.)
7. Install the door trim panel on the front door. (Refer to 23 - BODY/DOOR - FRONT/TRIM PANEL -
INSTALLATION.)
DOOR 23 - 295