Chrysler 2005 Crossfire SRT6 Service Manual page 3521

ZH
TIRE PRESSURE VERIFICATION TEST
TIRE PRESSURE VERIFICATION TEST
1.
Disconnect all jumper wires and reconnect all previously disconnected components and connectors.
Drive the vehicle at 40 km/h (25 MPH) for at least 2 minutes.
With the DRB III , confirm that no DTCs are present and that all components are functioning properly.
If a DTC is present, refer to the appropriate category and select the corresponding symptom.
Are any DTCs present?
YES >> Repair is not complete, refer to appropriate symptom.
NO >> Repair is complete.
TIRES/WHEELS - ELECTRICAL DIAGNOSTICS 22 - 35