Chrysler 2005 Crossfire SRT6 Service Manual page 3922

ZH
9. Guide the handle through the lower panel as you
separate the lower I/P (2) from the cluster cover
(1), removing the lower I/P from the vehicle.
REMOVAL - INSTRUMENT CLUSTER COVER
1. Remove the steering wheel. (Refer to 19 - STEER-
ING/COLUMN/STEERING WHEEL - REMOVAL).
2. Remove the lower instrument panel. (Refer to 23 -
BODY/INSTRUMENT
PANEL ASSEMBLY - REMOVAL).
3. Remove the sentry key antenna ring from the key
cylinder.
4. Remove the screws attaching the instrument clus-
ter cover to the lower instrument panel.
5. Disconnect the instrument cluster cover (1) from
the top with a plastic wedge.
6. Tip the instrument cluster cover toward the rear at
the top. Lift it over the jacket tube covering and
simultaneously guide the adjustment knobs through
the cover.
PANEL/INSTRUMENT
INSTRUMENT PANEL 23 - 361