Heated Mirrors - If Equipped; Tilt Side Mirrors In Reverse - If Equipped; Illuminated Vanity Mirrors - If Equipped - Chrysler 300 2017 Owner's Manual

Resetting the Power Folding Outside Mirrors
You may need to reset the power folding mirrors
if the following occurs:
• The mirrors are accidentally blocked while
folding.
• The mirrors are accidentally manually
folded/unfolded.
• The mirrors come out of the unfolded
position.
• The mirrors shake and vibrate at normal
driving speeds.
To reset the power folding mirrors, fold and
unfold them by pushing the button (this may
require multiple button pushes). This resets
them to their normal position.
Heated Mirrors — If Equipped
These mirrors are heated to melt frost
or ice. This feature will be activated
whenever you turn on the rear window
defroster (if equipped). Refer to "Cli-
mate Controls" in "Getting To Know Your Ve-
hicle" for further information.
Tilt Side Mirrors In Reverse — If
Equipped
Tilt Side Mirrors In Reverse provides automatic
outside mirror positioning which will aid the
driver's view of the ground rearward of the front
doors. The outside mirrors will move slightly
downward from the present position when the
vehicle is shifted into REVERSE. The outside
mirrors will then return to the original position
when the vehicle is shifted out of the REVERSE
position. Each stored memory setting will have
an associated Tilt Side Mirrors In Reverse posi-
tion.
NOTE:
The Tilt Side Mirrors In Reverse feature is not
turned on when delivered from the factory. The
Tilt Side Mirrors In Reverse feature can be
turned on and off using the Uconnect System.
Refer to "Uconnect Settings" in "Multimedia" for
further information.
Illuminated Vanity Mirrors — If
Equipped
An illuminated vanity mirror is located on the sun
visor. To use the mirror, rotate the sun visor
downward and swing the mirror cover upward.
The light turns on automatically. Closing the
mirror cover turns off the light.
Illuminated Vanity Mirror
"Slide-On-Rod" And Extender Features Of
Sun Visor
To use the "Slide-On-Rod" feature of the sun
visor, rotate the sun visor downward and swing
the sun visor so it is parallel to the side window,
grab the sun visor and pull rearwards until the
sun visor is in the desired position. To use the
extender feature of the sun visor, grab the
extender which is located at the rear of the visor
and pull rearward.
Slide-On-Rod Feature
43