Rear Window - Chrysler 2005 Crossfire SRT6 Service Manual

ZH
INSTALLATION - DETENT CABLE
1. Connect the detent cable (2) to the center bow.
2. Install the detent cable (2) to the front bow. Tighten
bolt to 8.5 N·m (75 in. lbs.).
3. Reassemble the top cover assembly. (Refer to 23 -
BODY/CONVERTIBLE
COVER - INSTALLATION).
FLUID
DESCRIPTION
The Convertible Top Power Top Hydraulic Assembly and Reservoir are filled at the factory with Pentosin CHF 11S.
Use Pentosin CHF 11S, Mopar part number 05127381AA. Pump noise and reduced component life may result if an
unapproved fluid is used.

REAR WINDOW

DESCRIPTION
The Rear Window is permanently fixed to the Convertible Top cover. The Rear Window is made of glass, and is
equipped with a defogger grid. The defogger grid can be repaired, but if the Rear Window is damaged, the Con-
vertible Top cover must be replaced. The rear glass is not serviced separate from the Convertible Top.
TOP/FOLDING TOP
CONVERTIBLE TOP 23 - 545