Chrysler 2005 Crossfire SRT6 Service Manual page 3893

23 - 332 HOOD
CAUTION: To avoid paint damage, have an assis-
tant help while removing the hood bolts.
4. Remove the upper bolt (1) from the left and right
hood hinges.
5. With the aid of an assistant, remove the hood from
the vehicle. Set the hood down on a suitable flat
surface.
INSTALLATION
CAUTION: To avoid paint damage, have an assis-
tant help while installing the hood.
1. With the aid of an assistant, position the hood on
the safety hooks on the hood hinges.
2. Loosely install the lower bolts (2) on the hood.
3. Loosely install the upper bolts (1) on the hood.
4. Align the hood with the bolts (1,2) to coincide with
the witness marks.
5. With the aid of an assistant tighten the hood hinge
bolts (1,2) to the hood. Tighten to 10 N·m (88 in.
lbs.).
ZH