Chrysler 2005 Crossfire SRT6 Service Manual page 3937

23 - 376 INSTRUMENT PANEL
INSTALLATION - INSTRUMENT CLUSTER COVER - RHD
1. Tip the instrument cluster cover toward the front at the top, then lift it over the column and install the cover firmly
into the I/P.
2. Install the screws attaching the instrument cluster cover to the lower instrument panel.
3. Install the SKREEM antenna ring to the key cylinder.
4. Install the right side lower instrument panel. (Refer to 23 - BODY/INSTRUMENT PANEL/INSTRUMENT PANEL
ASSEMBLY - INSTALLATION).
5. Connect the negative battery cable.
ZH