Chrysler 2005 Crossfire SRT6 Service Manual page 3784

23 - 236 DECKLID/LIFTGATE
REMOVAL - ROADSTER
1. Remove the decklid trim fasteners (2).
2. Disconnect the emergency release cable (3) and
remove from the trim panel (1).
INSTALLATION
INSTALLATION - COUPE
UPPER LIFTGATE TRIM PANEL
1. Push up on the upper liftgate trim panel (2) to
attach it to the liftgate.
2. Install the two screws (1) attaching the upper lift-
gate trim panel (2) to the liftgate.
3. Install the lower trim panel. Refer to Lower Liftgate
Trim Panel.
ZH