Chrysler 2005 Crossfire SRT6 Service Manual page 3573

ZH
REAR SPOILER MOTOR FAILURE (CONTINUED)
5.
REAR SPOILER DRIVER (UP) CIRCUIT SHORT TO GROUND
Turn the ignition off.
Measure the resistance between ground and the Rear Spoiler Driver
(Up) circuit at the Rear Spoiler Motor harness connector.
Is the resistance below 100k ohms?
Yes >> Repair the Rear Spoiler Driver (Up) circuit for a short to
ground.
Perform REAR SPOILER VERIFICATION TEST.
No >> Go to 6
6.
REAR SPOILER DRIVER (DOWN) CIRCUIT SHORT TO GROUND
With the ignition off.
Measure the resistance between ground and the Rear Spoiler Driver
(Down) circuit at the Rear Spoiler Motor harness connector.
Is the resistance below 100k ohms?
Yes >> Repair the Rear Spoiler Driver (Down) circuit for a short to
ground.
Perform REAR SPOILER VERIFICATION TEST.
No >> Replace the Rear Spoiler Motor.(Refer to 23 - BODY/EX-
TERIOR/SPOILER - REMOVAL).
Perform REAR SPOILER VERIFICATION TEST.
BODY - ELECTRICAL DIAGNOSTICS 23 - 25