Chrysler 2005 Crossfire SRT6 Service Manual page 4273

24 - 144 PLUMBING
1. Remove the HVAC housing.(Refer to 24 - HEAT-
ING & AIR CONDITIONING/DISTRIBUTION/HVAC
HOUSING - REMOVAL).
2. Remove the heater core.(Refer to 24 - HEATING &
AIR CONDITIONING/PLUMBING/HEATER CORE -
REMOVAL).
3. Remove the valve strip on the top of the HVAC
housing by removing the four screws and removing
the aluminum lines from the housing.
4. Disconnect the vacuum lines from the vacuum ele-
ment (2).
5. Separate the blower housing from air distribution
housing, unclip the two sliding clips (1).
6. Remove the four spring clips.
7. Remove the screw (1) behind the expansion valve.
8. Remove the foam gasket.
ZH