Chrysler 2005 Crossfire SRT6 Service Manual page 4242

ZH
4. Install the harness connector on heater core tem-
perature sensor located on the front of the HVAC
housing. Then install the evaporator temperature
sensor (1) to the HVAC case.
CAUTION: To avoid any damage to the vehicle a
helper may be required to aid in the removal of the
instrument panel support.
5. Install the instrument panel support to the vehicle.
6. Install the bolts (1) attaching the instrument panel
support to the A-pillars.
7. Connect the connectors (1) to the vacuum reservoir
switch over valve.
DISTRIBUTION 24 - 113