ZH
2. Remove the four nuts (3) attaching the spoiler wing
(1) to the liftgate (4).
NOTE: Be careful not to damage any paint when
removing the spoiler wing. The spoiler wing studs
(2) will be removed with the spoiler wing.
3. Remove the spoiler wing from the liftgate.
REMOVAL - SPOILER MOTOR HARNESS
1. Disconnect the negative battery cable.
2. Remove the lower liftgate trim panel. (Refer to 23 - BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/TRIM PANEL
- REMOVAL).
3. Disconnect the spoiler motor electrical connectors
(3), and separate the connectors from the bracket
(1).
4. Remove the 4 spoiler motor bracket nuts (2) to
gain access to the microswitch retainers.
5. Remove the retainers from the rear of the
microswitches (4).
6. Disconnect the harness (6) from the spoiler motor
(5), and remove the harness.
2005 ZH Service Manual
Publication No. 81-270-05036
EXTERIOR 23 - 318A
05ZH23-318A October, 2004