Chrysler 2005 Crossfire SRT6 Service Manual page 4315

25 - 22 EVAPORATIVE EMISSIONS
INSTALLATION
1. Install the charcoal canister shutoff valve (1) to
EVAP canister (2) using new O-ring (3).
2. Connect the charcoal canister shutoff valve har-
ness connector (1).
3. Connect the hoses (2).
4. Slide the EVAP canister to the right, on to mounting
bracket.
5. Install the splash shield and retaining nuts.
6. Lower the vehicle.
7. Connect the negative battery cable.
ZH