ZH
DOOR 23 - 293
INSTALLATION
1. Install the window regulator (5) through the assembly opening in the door.
2. Fasten the power window motor with three rivets (2).
3. Connect the power window motor (6).
4. Install the lower door nuts (4) in the door bottom (3), then install the rubber plugs.
5. Install the upper window regulator nut (1).
6. Install the upper window regulator nut (1) between the inner and outer door panels.
7. Install the door glass in the front door. (Refer to 23 - BODY/DOOR - FRONT/DOOR GLASS - INSTALLATION).