Chrysler 2005 Crossfire SRT6 Service Manual page 3526

22 - 40 TIRES/WHEELS - SERVICE INFORMATION
6. Check the radial runout (1). If it is still excessive,
mark the tire sidewall, wheel, and bolt at the point
of maximum runout and proceed to Method 2.
METHOD 2 (RELOCATE TIRE ON WHEEL)
Note: Rotating the tire on wheel is particularly effective when there is runout in both tire and wheel.
1. Remove the tire from the wheel and mount the wheel on a service dynamic balance machine.
2. Check the wheel radial runout and the lateral runout.
• Radial runout (1). This is measured by using a dial indicator (1) on the inner portion of the wheel (6).
• Lateral runout (1). This is measured by using a dial indicator (1) on the inner portion of the wheel (6) rim.
ZH