Chrysler 2005 Crossfire SRT6 Service Manual page 3621

ZH
9630 REAR BOW TRAVEL SENSOR (ROD SIDE) +/- CIRCUIT OPEN/SHORT TO GROUND (CONTINUED)
• When Monitored: Continuous with the ignition on.
• Set Condition: When the Power Top Control Module senses an open or a short to ground on the Rear
Travel Sensor (Rod Side) +/- circuit.
OPEN TRAVEL SENSOR (+) CIRCUIT
OPEN TRAVEL SENSOR (-) CIRCUIT
TRAVEL SENSOR (+) CIRCUIT SHORTED TO GROUND
TRAVEL SENSOR (-) CIRCUIT SHORTED TO GROUND
TRAVEL SENSOR
POWER TOP CONTROL MODULE
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.
Diagnostic Test
1.
Monitor the Rear Bow Travel Sensor (Rod Side)
Turn the ignition on.
The Convertible Top must be up and locked.
With the DRB III , select Sensor Display and monitor the RR BOW
TRVL SEN ROD.
Does the DRB III
10–25 Counts?
Yes >> Go To 8
No >> Go To 2
display RR BOW TRVL SEN ROD between
Possible Causes
CONVERTIBLE TOP 23 - 73