Chrysler 2005 Crossfire SRT6 Service Manual page 3942

ZH
11. Unhook the storage pocket (1) and remove it from
the vehicle.
12. Disconnect the electrical connector from the park-
ing brake switch (4).
13. Remove the plugs (3) and then remove the rear
edge guard (2) in the lower area.
Note: Cut the single-piece carpet (1) along dotted
lines in order to avoid time-consuming removal of
the heater or air conditioning systems.
CAUTION: Do not damage the electrical and pneu-
matic lines!
14. Cut the carpet (1) in the transmission tunnel area
along the dotted lines with a sharp knife.
INTERIOR 23 - 381