Chrysler 2005 Crossfire SRT6 Service Manual page 3777

ZH
INSTALLATION
1. Install the hinges onto the liftgate lining them up
with the witness marks in the paint.
2. Install the two bolts (1) attaching the hinges to the
liftgate. Tighten to 25 N·m (18 ft. lbs.).
3. Install the liftgate. (Refer to 23 - BODY/DECKLID/
HATCH/LIFTGATE/TAILGATE/LIFTGATE
INSTALLATION).
LATCH
REMOVAL
1. For removal of the latch, (Refer to 23 - BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/EXTERIOR HANDLE -
REMOVAL).
INSTALLATION
For installation of the latch, (Refer to 23 - BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/EXTERIOR HANDLE -
INSTALLATION).
LATCH STRIKER
REMOVAL
1. Remove the trunk rear trim panel. (Refer to 23 -
BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/
TRIM PANEL - REMOVAL).
2. Remove the bolts (1) attaching the striker (2) to the
vehicle.
-
DECKLID/LIFTGATE 23 - 229