Chrysler 2005 Crossfire SRT6 Service Manual page 4253

24 - 124 DISTRIBUTION
DEFROSTER DUCTS
REMOVAL
1. The defroster duct is part of the upper top section
of the instrument panel. There are plastic trim
pieces which make up the final duct distribution.
These trim pieces can be removed by, removing
the screws (1) in the outside edge of the trim piece
the inner edge is held into place by a tab slid under
the top section of the instrument panel.
INSTALLATION
1. Install the defroster duct trim piece into the top sec-
tion of the instrument panel. Then install the screw
(1).
ZH