Chrysler 2005 Crossfire SRT6 Service Manual page 4233

24 - 104 DISTRIBUTION
15. Remove any harness connectors (1) or electric
leads on the body transmission tunnel.
16. Remove the bolts and nuts (1) attaching the
steering column to the instrument panel support.
Note: It is not necessary to fully remove the steer-
ing column from the vehicle.
17. Relocate the steering column out of the working
area.
WARNING: BE SURE YOU HAVE TAKEN THE NEC-
ESSARY PRECAUTIONS TO DISABLE THE AIR-
BAG SYSTEM.
18. Remove the electrical harness connector (1) on
passenger airbag module.
19. Remove the heater ducts on left and right side of
the instrument panel support.
ZH